Fabrication & Erection of Equipments Service

Fabrication & Erection of Equipments

Do you want to get high-quality Fabrication & Erection of Equipment Services at an affordable price? You arrive at the right place.

This information will explain more about the Fabrication & Erection of Equipment Services.

Continue reading further below.

Established in the year 2014, SMVK is among the notable business enterprises affianced in the arena of presenting to our clients an immense consignment of services, including fabrication and erection of pipelines, fabrication, and erection of structures, AMC service of chemical and pharmaceutical plants, hot and cold insulation, and roofing sheet supply and fitting services. Furthermore, these services are highly valued and acknowledged for their dependability, accuracy, and affordability. We also maintain long-term relationships with our customers by providing them with relevant services.

We provide fabrication and erection of static and rotational equipment of all weights and sizes at all places and elevations, including all handling activities such as loading, unloading, and equipment alignment.

Reinforced Cement Concrete (RCC)

Though reinforced cement concrete (RCC) and pre-stressed concrete have emerged as the undisputed building industry leaders, steel structures are equally important. In many situations, structural steel is chosen for the framework, while masonry and concrete are used for infilling and completing components such as walls and floors. Because of this, structural steelwork equipment, as well as skilled fabricators, welders, and erection workers, are in high demand.

Steel Sructures

Steel structures are primarily used in thermal power installations. It is also used in railways. In thermal plants, all turbine, generator, and boiler supporting systems are made of structural steel, while the walls, floors, partitions, and other components are made of concrete. The anchor bolts are embedded in the concrete foundations, and the column bases are bolted to speed up the construction of several steel columns with heavy steel sections. While the foundations are being built, columns, beams, and girder sections are fabricated on-site. It saves lots of time.

Quality Of Fabrication And Erection

Steel structure life is determined by its treatment, the quality of steel, and the quality of the fabrication work. We provide the best quality steelwork in fabrication and erection. The amount of fabrication and erection of steelwork is done on-site in the thousands of tonnes range. At the same time, built-up girders and columns comprise the majority of the cargo, staircases, railings, and gratings, among other significant things. Brackets, gusset plates, battens, lacing, stiffeners, and braces are minor but essential steelwork components. Welders are highly skilled, electrodes must be of radiographic quality, and fabrication and erection equipment must be safe and current.

Our Services are Available in the Following Cities of Odisha

We also offer our Fabrication & Erection of Equipments Services in Anugul, Balangir, Baleshwar, Bargarh, Bhadrak, Cuttack, Dhenkanal, Ganjam, Jagatsinghapur, Jajpur, Kalahandi, Kendrapara, Kendujhar, Khordha, Koraput, Mayurbhanj, Nabarangapur, Nayagarh, Puri, Rayagada, Sambalpur, and Sundargarh.

Structural Steel Equipment

The equipment required for manufacturing and installing steel structures are gantries, welding transformers, cutting machines, winches, grinders, drills, trailers, ovens, and welder equipment. Depending on the project, every equipment component has a distinct amount and type.

Hoist Cranes

Portable hoisting cranes are used in the stores and fabrication area for material loading, unloading, and shifting. These hoist cranes are capable of handling 5 to 10 tonnes of load. For example, massive heavy plates are frequently used for plate girders or for bending into the shape of large pipes. Therefore, these cranes are commonly used to load and unload these plates. Also, the portable cranes handle fabricated components.

Although tower cranes are used to move massive and heavy materials, mobile cranes carry more minor things. Also, these are ideal for loading fabricated components onto trailers and emptying them in the erection area for later usage.

Gantries

Gantry cranes are essential in the fabrication yard during the fabrication of steel structures. It helps the workers shift steel materials and fabricated components from one place to another. Large steel plates with thicknesses ranging from 8 mm to 25 mm are manually adjusted. Therefore, a portable crane is also required in the fabrication area to move these plates from one location to another. These mobile cranes have enough boom lengths and can lift heavy components. The gantry crane area is determined according to the fabrication area. Gantry cranes with wide spans are only allowed to carry a maximum of 50 tonnes of weight, depending on the situation.

Electric Winches

Electric winches are mainly used for the erection of fabricated components. Single drum electric winches come with 16 mm standard quality thickness wire ropes. It is also equipped with magnetic brakes to handle electricity failure, and capacities ranging from 5 to 10 tonnes are commonly utilized. Electric winches are located in winch sheds properly arranged for full coverage of the erection area, depending on the spread of the erection area. A winch shed can also have three to four winches, and three to four such bungalows might be planned. For example, a power project structural steelworks needed 15 to 20 electric winches housed in 5 to 6 sheds.

Drilling Machines

The fabricated components need to be adequately produced bolt holes with precise sizes to create bolt joints. These holes must be drilled using drilling machines. Use primary magnetic drilling machines to drill holes in the plates. It would be helpful. Drilling bits of various sizes are also required for use in drilling machines. Keeping some extra parts on hand at the job site is a good idea.

Gas Cutting Sets

Gas cutting is not used in fabrication and erection sites. Because Gas cutters provide inconsistent and harsh cutting, electric cutters and pug-cutting machines are inaccessible in some areas. That's why gas-cutting sets are required in that type of place to speed up the installation work.

Welding Sets

Most of the time, manual welding sets are used in the fabrication area. However, automatic welding machines are also installed where continuous welding activity is required. These welding machines are equipped with mechanical heads. These machines run on a track and are mounted on the steel components to be welded to perform the welding. Manual welding machines are either generator or transformer type. Transformer-type welding machines are less expensive and run on Alternating Current (AC). The generator-type machines operate on Direct Current (DC) and are ideal for thin welding plates, sheets, and components.

The welders required the following equipment for their safety purpose: eye protection shields, gloves, and aprons for shielding their clothing from heat and sparks. They also need the chipping hammer for chipping off slag from the welding joints, a wire brush for cleaning the welded portion after slag removal, and tongs for handling hot components.

Electrode Ovens

Welding electrodes must be stored in ovens whenever the ambient temperature exceeds 25 degrees Celsius. The temperature is kept within the range of 110 degrees Celsius. The electrodes should constantly keep protected from moisture penetration from the atmosphere. In Winter season requires extra precautions. Ovens are either stationary or portable. A standing range includes many trays to keep the electrodes at the proper temperature. The welder and readily stored on-site sometimes carry the portable ovens. Portable electric ovens should be single-phase with, at minimum, a twin tray provision so that a welder has many electrodes to complete his task efficiently.

Why Choose SMVK Engineering & Fabrication

SMVK provides the best Fabrication & Erection of Equipments Services in Mumbai, Maharashtra, India. We have experience in Fabrication and Erection of Equipments Services. The organization works with engineers and technicians with years of experience and are subject matter professionals in their field. Our company provides a wide range of services at reasonable pricing. We offer SS/MS Reactor shifting & Erection, MSGLR Shifting & Erection, Chimney shifting & Erection, and Boiler Shifting & Erection services. We also provide All types of equipment shifting & Erection services.

We offer our services All Around India, including Mumbai and Maharashtra. We provide top-quality Fabrication & Erection of Equipments Services that can satisfy the demands of our clients. Are you looking for affordable Fabrication & Erection of Equipments Services for your Applications or Projects? Then SMVK Engineering & Fabrication is the company for you.

Learn More: Fabrication & Erection of Equipments Services In Punjab